He recommends using three grades of sandpaper on the edges of the brass stock and tubing. After soldering the nib to the shank, he beveled the business end by rubbing it on 150-grit sandpaper.

Alex shows the steps involved for working with two types of pre-bent and unbendable tubing: carbon and brass.

In this video, a dovetail hatchet is crafted from three different metals: steel, brass, and aluminum. The project is inspired ...

IN the issue of May 6th is described a process for bending brass tubing. The following is a much simpler method where a coil spring long enough and of the proper size is not available.

Thank you for watching! _____ TOOLS & MATERIALS USED - Dremel Stylo - Router Table - Brass Tubing - 2 Ton Epoxy - Isopropyl ...

Many outboard-powered boats use brass tube fittings for the motorwell drains. When properly installed and flanged, the fittings function well, but as a boat ages, the relatively thin brass material ...

He recommends using three grades of sandpaper on the edges of the brass stock and tubing. After soldering the nib to the shank, he beveled the business end by rubbing it on 150-grit sandpaper.

WILLITS, Calif. — If you invent something that becomes known as the Swiss Army knife of pot pipes, a virtually indestructible, highly designed 4 ounces of brass called the Proto Pipe that sells ...

Sony introduces the ECM-778 shotgun mic, offering superior sound quality and flexibility for high-precision audio recording, ...