The fuel pump assembly is now ready to drop in to the 2.25-inch hole. ... It’s a good idea to use pipe sealant on the fuel pump fittings. The fitting size is 1/4-inch NPT, ...

All Holley HydraMats come with a fitting in the center using either a 3/8- or 1/2-inch NPT fitting to feed the fuel pump inlet. See All 12 Photos. 03.

The fuel system business is booming. Aftermarket pumps, regulators, lines, fittings, tanks, injectors, fuel rails—even entire how-to books—revolve around the task of delivering more fuel to an ...

The low pressure fuel hose that connects the low pressure fuel pump to the direct injection fuel pump may crack over time, ... Hoses, lines/piping, and fittings. Recall date. 2018-12-27. Recall no ...

The EPA plans to phase out the rubber boots on pump handles. The rubber fitting is redundant as most ... The EPA says the vapor-capturing fuel pumps are redundant because more than 70% of all cars ...

The vehicle defect could lead to an engine stall while driving, increasing the risk of a crash, according to Ford's recall.

According to the American Petroleum Institute the gas-pump hose typically retains about one third of a gallon of fuel. So when you pump a couple gallons of 93-octane premium after the previous ...

The fuel pump assembly is now ready to drop in to the 2.25-inch hole. It's important that the fuel pump assembly is oriented so that the supply and return line fittings point toward the front of ...