News

Pneumatic controls are usually constructed of a series of valves connected through a pneumatic circuit board. Key to a valve’s consistent performance and reliability is the manifold housing it ...
According to Jesse Kershaw of FRPP, Ford Racing tested the Three-Valve intake to 2.5 bar pressure, or roughly 35 psi, and after some ballooning in the early development phases, the intake manifold ...
The Subject— Blow-By Racing's '05 Mustang GT. For our Three-Valve intake test, we headed to Blow-By Racing in Boca Raton, Florida. One of the company's shop cars is an '05 GT with ported heads ...
The 410M Series manifolds accommodate the company’s standard 310/410 Series in-line pneumatic valves. This permits mounting both three and four-way valves on the same manifold. The manifolds ...
The unit has integrated scalable I/O and is designed to work as a complete pneumatic valve manifold and I/O solution, interfacing with CC-Link IE Field Industrial Ethernet Network applications, ...
NITRA GVP series pneumatic miniature solenoid valves are an excellent choice for many automation applications with low flow requirements. These two- and three-port valves are typically used for on/off ...
Cleaning the idle air control valve (IACV) on your vehicle periodically helps keep carbon and other particles from building up on the valve, which can negatively affect the operation of the car ...
Divorced chokes use a thermostat mounted to the intake manifold, instead of the carburetor, with a rod connected directly to the choke valve assembly. As the engine heats up, the spring inside the ...
A blowoff valve is typically located after the intercooler (a cooler for cooling compressed turbo air) along the turbo outlet's piping. It serves as an ideal escape route for the compressed air ...
Let's take a little step back. The big players in the Tesla Model Y's cooling system are located in one small area at the front of the car, just between the frunk and the body's front bulkhead.
Divorced chokes use a thermostat mounted to the intake manifold, instead of the carburetor, with a rod connected directly to the choke valve assembly. As the engine heats up, the spring inside the ...