News

Part 1 of a two part article. Click here for Part 2. Originally, operational amplifiers (op amps) were not thought of as candidates for RF design, but the advent of newer, faster devices has now made ...
As a result, RF amplifiers, especially RF power amplifiers, cannot use conventional feedback at the 1-GHz and higher frequencies at which they operate. Just as daunting, the open-loop nature of most ...
In most RF amplifiers, the gain will vary somewhat over a wide frequency range. Look for an amplifier with gain flatness over segments over a ±100-MHz range that’s as low as possible, less than ...
The TA1165 is a Class AB gallium nitride (GaN)-based amplifier delivering up to 20 W of RF output power across the 5.5 GHz to ...
RF amplifier basics Jul 1, 2003 12:00 PM, By John Battison, P.E., technical editor, ... In a tube design, this is achieved by supplying sufficient negative bias voltage to the control grid to ensure ...
A tough challenge for test engineers is explored in terms of test methods, pitfalls, and measurement errors. For the test engineer, RF and microwave power amplifier testing imposes unique challenges.
If you need an amplifier, [Hans Rosenberg] has some advice. Don’t design your own; grab cheap and tiny RF amplifier modules and put them on a PCB that fits your needs. These are the grandchil… ...
Guerrilla RF, Inc. (OTCQX: GUER) announces that its high-efficiency GRF5509 4-watt power amplifier was selected by Impinj (NASDAQ: PI) for use in their enterprise-grade RAIN RFID reader module ...
If you need an amplifier, [Hans Rosenberg] has some advice. Don’t design your own; grab cheap and tiny RF amplifier modules and put them on a PCB that fits your needs. These are the ...
Guerrilla RF’s GRF5509 high-performance power amplifier paired with Impinj’s advanced RAIN RFID reader chips to enable increased read range and improved readability of RAIN RFID tags ...