When I was done, I realized: all the switch-controlled outlets were mounted upside-down (as shown in the top right image), while the rest were right side up (top left). What do you think so far?

I'm not sure if this even exists, or if I'm overthinking it and there is a completely different/better way of accomplishing this. Here's the setup: I have a patio light controlled by a switch ...

Next, cut a hole to accommodate the switch box you’re planning to add, and then cut a one- to two-inch tall slot a few inches wide below the outlet to allow access to fish the wire through.

Although most electric outlets face the same way, there isn't a right or wrong direction. However, some receptacles appear upside down from what we're used to.

These can be plugged into outlets around your house and a relay inside each module will switch whatever device is plugged into it after receiving a command from the remote.

Have you ever seen an outlet with the grounding hole on top? It's not a mistake. There are a couple of reasons why electricians may install them this way.

Ed Begley, owner of the most evil propulsion system ever conceived, has put his stamp of approval on GreenSwitch, a wireless energy control system that ...

iDevices Wall Outlet The iDevices Wall Outlet has a lot in common with the Dimmer Switch, including its built-in pigtail connectors, which make replacing an existing outlet a snap.

iDevices brings its smart power control system to the outdoors, but you’ll pay extra for it. As any homeowner knows, a standard outlet won’t work in an outdoor setting, as some level of ...

Based on the 2020 NEC. Illumination is required for outdoor entrances and exits at dwelling units, but the permitted location of the required lighting outlet may provide us with a few surprises.

It makes more sense to install electric outlet receptacles upside down for certain devices, depending on the way their power cord is designed.