Last Black Friday, this Anker USB-C Hub cost $24 and since then it has been reduced only once to a phenomenal price of $18. Today is the second time that this specific offer has dropped this low: At ...

But Anker also makes the 7-Port USB 3.0 Hub, which uses external power along with a USB-B to A connector to facilitate seven extra USB-A 3.0 ports. This is because, in edge cases, a hub can refer ...

USB-C is here to stay, but if you’ve made the jump to the new port standard early, you might need a new USB-C to get your old ports back. And for most people, the one you can buy is the Satechi ...

USB-C hub monitors can be a bit confusing, but deciphering the details is worth the effort. You’ll need to do the same mental gymnastics to buy the right USB-C hub or dock, anyway.

The new hub is compatible with all Raspberry Pi models and connects via a USB-A 3.0 connector on an integrated 8cm cable. It’s also small enough to fit in your pocket.

USB-C hubs are (sadly) pretty common these days, and now Sony is getting in the game with the MRW-S3, a nice-looking hub that checks a whole bunch of high-end spec boxes like 100W USB-C PD ...

Like all things USB-C hubs aren't as simple as with earlier USB versions. With options for connectivity, video, and power delivery, there are more compatibility issues, that can be hard to debug.

This is where USB hubs come into play and today I'm taking a closer look at two of them. On the test bench is the Inateck four-port HBU3VL2-4 USB 3.0 hub and the Inateck three-port HBU3VL3-4 USB 3 ...

Some of the USB hub chips (e.g. GL3520 for 3.0 hub) have individual enable pin to control power switches/OC protection to each port. Often this feature is not used on cheap Hubs nor the reduced ...

So to add more USB ports to the Zero you will need a hub chip that takes up PCB space as well as the relevant passive components, adding more USB takes space and extra components, its not just a ...